Name: markalean 45° Corners for 50mm, 75mm, 100mm Rolls
SKU: 2990
Availability: InStock

markalean 45° Corners for 50mm, 75mm, 100mm Rolls

Packs of 10- 45° Corners Designed to complete your floor marking set-up, for use with markalean standard width rolls.

Hazard markings are for illustration purposes only as markings may differ.

For use with our range of markalean lean floor marking tape rolls to give you a complete and easy solution for 5S marking requirements. Made by die cutting larger sheets of markalean, the available range of junctions, joins, corners, and shapes give you an easy way to join and complete your floor marking system. Being manufactured from the same industrial grade markalean material means you can rest assured that these will blend in seamlessly and last just as long as the rest of our Lean warehouse marking tape range.

Sold as packs of 10 in your chosen colour to match your marking scheme. These die cuts remain just as easy to apply as the rest of the range, simply peel the liner and apply to a clean dry surface and it can be travelled over instantly. As markalean can be removed with minimal reside left behind, it makes the perfect solution to the changing needs of your business, as it can be removed and replaced as your marking requirements change.

At markasafety we offer a large range of quality floor safety systems and can offer advice on the products best for your application. To discuss your requirements and how the markalean range may be a good fit to your facility, call or email us today and we will be happy to assist.

Available for use with: 50 mm, 75 mm, and 100 mm width rolls

Colours: Black, White, Yellow, Green, Blue, Red, Orange, Black/Yellow Hazard, Red/White Hazard, Black/White Hazard

1. Material Storage

The material should be stored in a warm, dry conditions in the original protective packaging to prolong its lifespan

2. Surface Preparation

As with all self adhesive tape products, the surface should be clean and dry. Ideally an IPA cleaner should be used to remove all surface contaminants such as paint flakes. Do not under any circumstances use petrol, lighter fluid or methylated spirits to complete this process because they leave behind a thin, greasy residue. The prepared surface should be above 10°C.

3. Porous Surface Sealing

Before application, any porous surfaces should be sealed to prevent water attacking the adhesive. Ideally you should apply Toluene based primers. Apply a thin coat to the clean surface using a paint brush and then leave to dry

4. Tape Application

Peel back part of the release liner and then press firmly onto the prepared surface, gradually peeling back the liner as you apply the tape. Make sure that the tape is not too taut.

5. Finish

Once the tape has been applied, press the tape down firmly using even pressure. If it has been correctly applied the surface can be walked on immediately, but you will achieve maximum benefit from the adhesive system after 48 hours.

We Aim to Dispatch and deliver all stocked products within 3-5 working days, However some products may take longer. Upon dispatch we will provide tracking information, showing the service used and estimated delivery date. For urgent deliveries or to check stock please contact us to confirm lead times.

Delivery Charges:

All orders up to £25 are charged at £3.50 Standard delivery

All orders over £25 but less than £80 are charged at £9.50 Standard delivery

And on orders over £80 Standard Carriage is free of charge

Order amounts and carriage charges are exclusive of VAT