Name: markalean Arrow Floor Markers
SKU: 3132
Availability: InStock

markalean Arrow Floor Markers

Safely Guide traffic through your environment with our markaline arrows. Sold in packs of 10 of your chosen size and available in Small or Large Sizes. Easy to apply, with a self-adhesive backing. Hazard markings are for illustration purposes only as markings may differ.

Our markalean Arrow Die cuts are designed to complete your floor marking set-up, and efficiently mark out and guise traffic in your facility. Manufactured by the well-respected brand, these can be ordered to match your existing markalean colour choice. Sold as pack of 10 and available in Small (100mm x 65mm) or Large (230mm x 300mm) variants. Easy to apply, with a self-adhesive backing that attaches to hard floors with ease. It can be removed when no longer required and promise to not damage the ground surface, leaving minimal residue behind.

As each one has been pre-cut to size, it eliminates the need for dangerous cutting machinery. Being manufactured from the same industrial grade markalean material means you can rest assured that these will blend in seamlessly and last just as long as the rest of our Lean warehouse marking tape range.

Along with our markalean arrows, we have a wide selection of products available to browse and purchase here in our online store. If you have any questions about this product or require additional specification information, get in contact with our friendly sales team today. We’ll help guide you towards the right solution for your needs today.

Sold as a pack of 10 in your chosen variant

Colours: Black, White, Yellow, Green, Blue, Red, Orange, Black/Yellow Hazard, Red/White Hazard, Black/White Hazard

Size: Small (100mm x 65mm) or Large (230mm x 300mm)

1. Material Storage

The material should be stored in a warm, dry conditions in the original protective packaging to prolong its lifespan

2. Surface Preparation

As with all self adhesive tape products, the surface should be clean and dry. Ideally an IPA cleaner should be used to remove all surface contaminants such as paint flakes. Do not under any circumstances use petrol, lighter fluid or methylated spirits to complete this process because they leave behind a thin, greasy residue. The prepared surface should be above 10°C.

3. Porous Surface Sealing

Before application, any porous surfaces should be sealed to prevent water attacking the adhesive. Ideally you should apply Toluene based primers. Apply a thin coat to the clean surface using a paint brush and then leave to dry

4. Tape Application

Peel back part of the release liner and then press firmly onto the prepared surface, gradually peeling back the liner as you apply the tape. Make sure that the tape is not too taut.

5. Finish

Once the tape has been applied, press the tape down firmly using even pressure. If it has been correctly applied the surface can be walked on immediately, but you will achieve maximum benefit from the adhesive system after 48 hours.

We Aim to Dispatch and deliver all stocked products within 3-5 working days, However some products may take longer. Upon dispatch we will provide tracking information, showing the service used and estimated delivery date. For urgent deliveries or to check stock please contact us to confirm lead times.

Delivery Charges:

All orders up to £25 are charged at £3.50 Standard delivery

All orders over £25 but less than £80 are charged at £9.50 Standard delivery

And on orders over £80 Standard Carriage is free of charge

Order amounts and carriage charges are exclusive of VAT