Name: markaline 90° Corner for 50mm, 75mm, 100mm Rolls
SKU: 2416
Availability: InStock

Markaline Industrial Line Marking Tape Features and benefits:

Great alternative to paint or resin
Hard wearing
Quick and easy to install
Different widths and colours
Extruded PVC
2 year manufacturers warranty

General description:

90° Corners Designed to complete your floor marking set-up, markaline Junctions – Joins & Corners are a tailored made solution. Manufactured by the well-respected brand, these packs of 10 can be ordered to match your existing markaline size and colour choice. Each one forms either a join or a corner, allowing you to frame areas in your warehouse and define specific spaces. It is easy to apply, with a self-adhesive backing that attaches to hard floors with ease. It can be removed when no longer required and promise to not damage the ground surface, leaving minimal residue behind.

These packs feature cuts, joiners, junctions and end caps as per your choice. As each one has been pre-cut to size, it eliminates the need for dangerous cutting machinery. All you need to do is cut off straight and butt your choice piece up against your existing setup. They are available in the same colours as the original markaline and are an essential option choice for busy warehouses and workshops. As with the full-sets, these junctions are homogenous in their construction and will maintain their shape and size over time.

Along with our markaline Junctions – Joins & Corners, we have a wide selection of products available to browse and purchase here in our online store. If you have any questions about this product or require additional specification information, get in contact with our friendly sales team today. We’ll help guide you towards the right solution for your needs today.

Available for use with: 50 mm, 75 mm, and 100 mm width rolls

Colours: Black, White, Yellow, Green, Blue, Red, Orange, Fluorescent Yellow, and Glow in the Dark

1. Material Storage

The material should be stored in a warm, dry conditions in the original protective packaging to prolong its lifespan

2. Surface Preparation

As with all self adhesive tape products, the surface should be clean and dry. Ideally an IPA cleaner should be used to remove all surface contaminants such as paint flakes. Do not under any circumstances use petrol, lighter fluid or methylated spirits to complete this process because they leave behind a thin, greasy residue. The prepared surface should be above 10°C.

3. Porous Surface Sealing

Before application, any porous surfaces should be sealed to prevent water attacking the adhesive. Ideally you should apply Toluene based primers. Apply a thin coat to the clean surface using a paint brush and then leave to dry

4. Tape Application

Peel back part of the release liner and then press firmly onto the prepared surface, gradually peeling back the liner as you apply the tape. Make sure that the tape is not too taut.

5. Finish

Once the tape has been applied, press the tape down firmly using even pressure. If it has been correctly applied the surface can be walked on immediately, but you will achieve maximum benefit from the adhesive system after 48 hours.

We Aim to Dispatch and deliver all stocked products within 3-5 working days, However some products may take longer. Upon dispatch we will provide tracking information, showing the service used and estimated delivery date. For urgent deliveries or to check stock please contact us to confirm lead times.

Delivery Charges:

All orders up to £25 are charged at £3.50 Standard delivery

All orders over £25 but less than £80 are charged at £9.50 Standard delivery

And on orders over £80 Standard Carriage is free of charge

Order amounts and carriage charges are exclusive of VAT